Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Magnetizers may have various failures during long-term use, and timely detection and treatment of these problems is essential to ensure production efficiency. The following are the common failures and solutions:

Power supply failure:

Phenomenon: The magnetizer cannot be turned on and the power indicator does not light up.
Causes: broken power cord, loose plug, damaged power switch, blown fuse.
SOLUTION: Check power cord connections, replace damaged switches and fuses, and make sure grounding is good.

Poor magnetization:

Phenomenon: Insufficient magnetic field strength after magnetization, unstable magnetic properties.
Causes: Insufficient magnetizing voltage, coil damage, capacitor aging, improper material selection.
Solution: Increase the magnetizing voltage, check the insulation of the coil, replace the aging capacitor, and make sure the material matches the equipment.

Control circuit failure:

Phenomenon: The magnetization process is unstable and the parameter display is abnormal.
Cause: Relay failure, SCR damage, aging control chip.
Solution: Check control components, replace damaged relays and SCRs, and recalibrate control parameters.

Security Protection Trigger:

Phenomenon: The equipment stops automatically and the protection indicator lights up.
Cause: Over-current, over-voltage, over-temperature protection triggered.
Solution: Check the load condition, ensure good heat dissipation, and adjust the magnetization parameters to a safe range.

JiuJu magnetizer has perfect self-diagnostic function, which can monitor the operation status of the equipment in real time, and discover and warn potential problems in time. JiuJu magnetizer adopts modular design, key components such as capacitors, SCRs, etc. are imported brands, which greatly reduces the failure rate.

Regular Maintenance Recommendations: JiuJi magnetizers are recommended to check the capacitor performance monthly, clean the inside of the equipment quarterly, and perform full calibration and maintenance annually. JiuJu magnetizer provides professional after-sales service, including equipment installation and commissioning, operation training, fault repair and other one-stop services.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Other Industries

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Magnetization for Magnetic Phone Chargers – Precisely Aligned with Core Magnetic Charging Processes

November 13, 2025

We specialize in magnetization and testing services for magnetic phone charger heads and magnetic data cables. Using precise magnetization processes, we ensure stable magnetic performance of charger heads and professionally verify that data cables meet magnetic performance standards. This guarantees secure connections, reliable use, and compatibility with all mobile magnetic charging scenarios.

JIUJU Electronic Magnetizers: Solving Industry Pain Points and Achieving the Optimal Balance of Performance and Cost

November 11, 2025

JIUJU electronic magnetizers address the challenges faced by electronics manufacturers. Using transformer step-up and pulse phase-shift control technology, they ensure magnetization precision and efficiency. Intelligent dual cooling and optimized material selection reduce costs, achieving a balance of high performance and low cost while improving production efficiency.

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Core Logic of Automotive Motor Magnetizer: Directional Magnetization and Intelligent Magnetization Dual Drive

December 31, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instrument Magnetic Charging Service In the booming development of new energy automobile industry, the motor, as the core power source of the whole vehicle, directly determines the performance of the vehicle's power output efficiency and range performance. The consistency of the magnetic properties of permanent magnets is the core premise to ensure the long-term stable operation of the motor. JiuJu automobile motor magnetizer, with directional magnetization + intelligent magnetic control dual-core technology as the support...

How to break the new energy vehicle motor rotor magnetization problem?

December 5, 2025

New energy vehicle motor rotor magnetization is prone to problems such as uneven magnetic field and low magnetization efficiency, which directly affects motor torque output, vehicle smoothness and vehicle energy consumption. Precise magnetic control technology can achieve precise control of magnetic field strength and distribution through optimized magnetic circuit design, dynamic regulation of magnetization parameters and real-time intelligent monitoring, effectively solving the traditional magnetization pain points, improving magnetization efficiency and rotor magnetic field consistency, and contributing to the improvement of motor operation efficiency, energy consumption and life extension, providing reliable support for the upgrading of new energy automobile motor performance and the high-quality development of the industry.

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

JIUJU 3050 Magnetizer Speaker Transfer Fixture – Dedicated Fixture for NdFeB Magnetization and Adsorption

November 13, 2025

The JIUJU 3050 magnetizer speaker transfer fixture is specially designed for NdFeB magnetization applications. It ensures stable product adsorption during the magnetization process, preventing displacement and guaranteeing precise magnetization. Fully compatible with speaker production workflows, it serves as an efficient supporting device for NdFeB magnetization operations.

JIUJU Speaker Magnetization Practical Guide: Principles and Hands-On Procedures

November 13, 2025

Based on electromagnetic induction, magnetic domains are enhanced through regulated pulse currents. This guide covers practical steps including pre-magnetization equipment setup and speaker inspection, fixture securing, circuit connections, pulse magnetization, as well as post-magnetization testing with a gauss meter and sound quality assessment. It helps ensure precise JIUJU speaker magnetization while maintaining magnetic field strength and audio performance.

JIUJU Four-Station Motor Magnetizer – A Revolutionary Solution to Enhance New Energy Vehicle Motor Manufacturing Efficiency

November 10, 2025

Professional Four-Station Motor Magnetizer Solution – Providing highly efficient, automated magnetization and testing integrated equipment for new energy vehicles, consumer electronics, and industrial motor manufacturers. Significantly boosts production efficiency by 300%, reduces labor costs, and ensures consistent product quality.

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetization Video Case: Tea Magnetization

December 16, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Tea magnetization is a technical means of applying magnetic fields to tea processing. Tea is processed by means of magnetic fields of a specific strength, with the aim of altering the structure of molecules and the distribution of substances in the tea, thus affecting the quality characteristics of the tea. Tea magnetization is based on the following scientific principles: Effect of magnetic field on water molecules Magnetic field can change the structural arrangement of water molecules, making water...

JiuJu Magnetizing Video Case: Aluminum Tea Can Magnetizing Proofing

December 11, 2025

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Services Aluminum tea cans are widely popular as ideal containers for tea storage because of their light weight, durability and good sealing properties. However, aluminum itself is a non-magnetic material and is traditionally difficult to magnetize. With years of technical accumulation and innovative research and development, JiuJi has successfully developed a professional magnetizing technology for aluminum tea cans, bringing a brand new solution for tea storage. JiuJu...

JiuJu Magnetization Video Case: Magnetic Bracelet Magnetization

December 10, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Magnetic Bracelet Magnetization is a standardized process that helps to restore the magnetic force of magnetic bracelets, allowing your jewelry to function as it should. The entire process is fast and efficient, and can be completed in a matter of seconds with consistent and reliable results. Magnetization is a specialized process that requires the use of specialized equipment and techniques. By properly magnetizing...