Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

Spring back to the earth to start a new chapter, oars and sails to a new journey. 2026 the eighth day of the first month of the Chinese lunar calendar, just in time for the start of the new year, jiuzhu automation warmth, vitality, all the colleagues faded to the new year's idleness, full of enthusiasm, high attitude gathered in the factory, and jointly open the new year's journey of struggle, to practice the initial heart with solid work, and to write glory with the advancement.

At 8:00 a.m., the auspicious time as promised, the factory firecrackers, joyful and noisy, bursts of sound breaking through the sky, not only to the past year of hard work, fruitful tribute, but also to the 2026 year of solidarity, prosperous development of the good wishes.

Red-hot firecracker debris paved the way forward, the festive atmosphere lingered throughout the plant, each Jiu Giants face is full of confidence and expectations, with the blessings of the New Year and the energy to move forward, ready to go, run to the new journey, with a new attitude to meet the opportunities and challenges of the new year.

At 8:10 a.m., JiuJu Automation 2026 annual general meeting was held on schedule in the fourth floor conference room, all the staff gathered together and talked about the new chapter, the atmosphere was solemn and warm, surging with the power of upward mobility. At the meeting, Mr. Zhou delivered an inspiring opening speech, and sent his best wishes and sincere greetings for the New Year to all colleagues.

In the speech, Mr. Zhou fully affirmed the bright achievements made by all the JiuGiants in the past year with one heart and one mind, rising to the challenge and overcoming difficulties, and expressed his heartfelt thanks to each and every employee who stood fast at their posts and made silent contributions. At the same time, he based on the industry development trend, the company's blueprint for the development of the new year, the core objectives and key tasks to make a clear deployment, a clear way forward. Mr. Zhou encouraged all the colleagues, the new year to adhere to the original intention, plowing automation industry, with a rigorous and pragmatic attitude, professional and exquisite ability, unity and cooperation style, the heart of a think, work together, hand in hand, the line is not slack, and together to promote the automation of the JiuJu steady progress, and then climb a new peak of the cause.

The site of the opening meeting was warm and pleasant, the God of Fortune made a stunning appearance, with a full of blessings for every member of the JiuJi family hand delivered the red packet to start work and New Year's blessings. The small red packet carries the company's deep concern for the staff and ardent expectations; bright smiles, conveying the firm confidence of every JiuJi giant for the new year and a good vision.

The scene of constant laughter, warmth infiltrated the hearts of people, this “start red” is not only an auspicious color, but also a cohesion, a strong impetus to the new course, so that each of the Giants are deeply feel the warmth and strength of the family, and further cohesion of a concerted effort to create a future of the mighty force.

The old year has unfolded a thousand brocade, the new year is more into a hundred-foot pole. 2026, is the industry iterative upgrading, opportunities and challenges co-exist in one year, but also a long giant automation to take advantage of the momentum, focus on breakthroughs in the key year. Standing on the new historical starting point, all the JiuJi giants will bear in mind the original mission, adhere to the development of faith, closely follow the pace of development of the company, with more full of enthusiasm, more pragmatic style of work, more excellent results, based on their own work, excellence, in the field of automation continue to plough, innovation and breakthroughs, to create a higher value for the customer, and to inject more kinetic energy for the development of the industry.

A new journey, a new mission, a new action, 2026, JiuJu Automation has set sail, dreaming forward! All colleagues will be in the same attitude, the same direction, the same peer force, ride the waves, and strive to be the first, and strive to write a new chapter of the company's high-quality development, and jointly cast a more brilliant, more brilliant JiuJu automation tomorrow!

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Other Industries

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Precision Magnetization for Ferrite Cubes

November 13, 2025

Specializing in ferrite cube micro-magnetization, we deliver customized, precise solutions tailored to ferrite cube material properties. By fine-tuning parameters, we ensure the magnetization meets exact standards, fulfilling high-precision magnetic requirements and adapting to applications with strict demands for magnetization accuracy.

Magnetization for Magnetic Phone Chargers – Precisely Aligned with Core Magnetic Charging Processes

November 13, 2025

We specialize in magnetization and testing services for magnetic phone charger heads and magnetic data cables. Using precise magnetization processes, we ensure stable magnetic performance of charger heads and professionally verify that data cables meet magnetic performance standards. This guarantees secure connections, reliable use, and compatibility with all mobile magnetic charging scenarios.

JIUJU Electronic Magnetizers: Solving Industry Pain Points and Achieving the Optimal Balance of Performance and Cost

November 11, 2025

JIUJU electronic magnetizers address the challenges faced by electronics manufacturers. Using transformer step-up and pulse phase-shift control technology, they ensure magnetization precision and efficiency. Intelligent dual cooling and optimized material selection reduce costs, achieving a balance of high performance and low cost while improving production efficiency.

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Core Logic of Automotive Motor Magnetizer: Directional Magnetization and Intelligent Magnetization Dual Drive

December 31, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instrument Magnetic Charging Service In the booming development of new energy automobile industry, the motor, as the core power source of the whole vehicle, directly determines the performance of the vehicle's power output efficiency and range performance. The consistency of the magnetic properties of permanent magnets is the core premise to ensure the long-term stable operation of the motor. JiuJu automobile motor magnetizer, with directional magnetization + intelligent magnetic control dual-core technology as the support...

How to break the new energy vehicle motor rotor magnetization problem?

December 5, 2025

New energy vehicle motor rotor magnetization is prone to problems such as uneven magnetic field and low magnetization efficiency, which directly affects motor torque output, vehicle smoothness and vehicle energy consumption. Precise magnetic control technology can achieve precise control of magnetic field strength and distribution through optimized magnetic circuit design, dynamic regulation of magnetization parameters and real-time intelligent monitoring, effectively solving the traditional magnetization pain points, improving magnetization efficiency and rotor magnetic field consistency, and contributing to the improvement of motor operation efficiency, energy consumption and life extension, providing reliable support for the upgrading of new energy automobile motor performance and the high-quality development of the industry.

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

JIUJU 3050 Magnetizer Speaker Transfer Fixture – Dedicated Fixture for NdFeB Magnetization and Adsorption

November 13, 2025

The JIUJU 3050 magnetizer speaker transfer fixture is specially designed for NdFeB magnetization applications. It ensures stable product adsorption during the magnetization process, preventing displacement and guaranteeing precise magnetization. Fully compatible with speaker production workflows, it serves as an efficient supporting device for NdFeB magnetization operations.

JIUJU Speaker Magnetization Practical Guide: Principles and Hands-On Procedures

November 13, 2025

Based on electromagnetic induction, magnetic domains are enhanced through regulated pulse currents. This guide covers practical steps including pre-magnetization equipment setup and speaker inspection, fixture securing, circuit connections, pulse magnetization, as well as post-magnetization testing with a gauss meter and sound quality assessment. It helps ensure precise JIUJU speaker magnetization while maintaining magnetic field strength and audio performance.

JIUJU Four-Station Motor Magnetizer – A Revolutionary Solution to Enhance New Energy Vehicle Motor Manufacturing Efficiency

November 10, 2025

Professional Four-Station Motor Magnetizer Solution – Providing highly efficient, automated magnetization and testing integrated equipment for new energy vehicles, consumer electronics, and industrial motor manufacturers. Significantly boosts production efficiency by 300%, reduces labor costs, and ensures consistent product quality.

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJi Magnetizing Video Case: Hardware Impeller Magnetizing Process and Applicable Scenarios

January 5, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Hardware Impeller Magnetization is the technical process of magnetizing the impeller made of hardware by means of special magnetic charging equipment, the core purpose of which is to endow the impeller with a specific magnetism to meet the functional requirements of mechanical equipment such as motors, pumps, fans, and so on, under such scenarios as transmission, The core purpose is to give the impeller specific magnetic properties to meet the functional requirements of mechanical equipment such as motors, pumps, fans, etc. in driving, adsorption, positioning, etc. The process is based on the material of the impeller (e.g. iron, steel, alloy, etc.), the structural dimensions and the required magnetization...

JiuJu Magnetization Video Case: Tea Magnetization

December 16, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Tea magnetization is a technical means of applying magnetic fields to tea processing. Tea is processed by means of magnetic fields of a specific strength, with the aim of altering the structure of molecules and the distribution of substances in the tea, thus affecting the quality characteristics of the tea. Tea magnetization is based on the following scientific principles: Effect of magnetic field on water molecules Magnetic field can change the structural arrangement of water molecules, making water...

JiuJu Magnetizing Video Case: Aluminum Tea Can Magnetizing Proofing

December 11, 2025

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Services Aluminum tea cans are widely popular as ideal containers for tea storage because of their light weight, durability and good sealing properties. However, aluminum itself is a non-magnetic material and is traditionally difficult to magnetize. With years of technical accumulation and innovative research and development, JiuJi has successfully developed a professional magnetizing technology for aluminum tea cans, bringing a brand new solution for tea storage. JiuJu...

JiuJu Magnetization Video Case: Magnetic Bracelet Magnetization

December 10, 2025

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service Magnetic Bracelet Magnetization is a standardized process that helps to restore the magnetic force of magnetic bracelets, allowing your jewelry to function as it should. The entire process is fast and efficient, and can be completed in a matter of seconds with consistent and reliable results. Magnetization is a specialized process that requires the use of specialized equipment and techniques. By properly magnetizing...