Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

In industrial production and equipment manufacturing scenarios, the performance of motors has a direct impact on the efficiency and service life of products. Poor energy efficiency, fluctuating operation and high energy consumption of motors are mostly related to the technical control of the magnetization process. Industry data shows that the magnetization process is not up to standard, which can easily lead to motor performance does not meet the application requirements, which will increase the average production cost of the enterprise 12%-15%, equipment failure rate 20%. If you want to properly deal with these problems, the selection of professional and reliable magnetization equipment is particularly critical. Relying on its own technical accumulation and practical application results, JiuJu magnetizing equipment has become the preferred product in the industry.

As the core component of energy conversion, the magnetic strength and uniformity of the permanent magnets inside the motor are directly related to the motor's output power and operational stability. Traditional magnetizing equipment is limited by technical conditions, and is prone to unstable magnetizing voltage and imprecise control of magnetizing time, which leads to uneven magnetization of permanent magnets, resulting in torque fluctuations and abnormal heat generation during the operation of the motor.

In response to this common pain point in the industry, JiuJi magnetizing equipment adopts the cutting-edge pulse magnetizing technology, which can generate high-energy, short-pulse magnetizing currents, allowing permanent magnets to quickly achieve saturation magnetization and effectively guaranteeing an even distribution of magnetic flux.

The intelligent control system of JiuJi magnetizing equipment also has significant advantages. The system enables precise adjustment and real-time monitoring of parameters, allowing users to personalize the configuration of parameters such as magnetizing voltage, pulse frequency and magnetizing time according to the actual needs of different types of motors. The equipment is equipped with high-precision sensors that can collect data during the magnetization process in real time, and then automatically optimize the magnetization program through algorithms to control the magnetization error within ±1%, effectively improving the consistency and stability of the magnetization quality. In addition, the equipment adopts a modular design, which is compatible with a wide range of specifications from small micro-motors to large industrial motors, and is applicable to a wide range of fields such as home appliances, new energy vehicles, industrial automation, and so on.

JiuJi's magnetizing equipment has shown remarkable results in practical applications. In the application scenario of a new energy vehicle manufacturer, the introduction of JUJI magnetizing equipment has increased the average output power of the motor by 18%, reduced energy consumption by 15%, and increased the product qualification rate from 90% to 97%. In the home appliance industry, a well-known enterprise has adopted JUJI magnetizing equipment, which has lowered the noise level of the motor by 25%, and has significantly improved its operation stability and reduced the after-sale failure rate of its products by 30%. These practical application data show that JiuJi magnetizing equipment can effectively optimize the performance of motors, help enterprises control production costs and further enhance market competitiveness.

With the continuous upgrading of motor manufacturing technology, the performance of magnetizing equipment has a direct impact on the final quality of motors. With advanced technology, stable performance and wide applicability, JURONG magnetizers provide reliable support for motors to meet application standards. Whether you are a manufacturer or a maintenance organization, when you choose a JURONG magnetizer, you are choosing an efficient and stable solution for motor performance.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

JiuJu Magnetization Case: Record of the whole process of magnetizing silicone magnetic products

February 25, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service In the industrial manufacturing field, silicone magnetic products are widely used in smart wear and sealing components because of their flexibility and magnetic properties. The core of their magnetic properties depends on professional magnetization process. This time, JiuJu magnetization undertakes the project of magnetizing silicone products, and successfully realizes the product's magnetic force from 0.01 gauss to 15.5 gauss by leaps and bounds, the following is the whole process detail...

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...

Motor magnetizer: what core indicators should be most concerned about when the factory selection

March 5, 2026

Motor magnetizer: what core indicators should be most concerned about when the factory selection

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

February 27, 2026

JiuJu Magnetization Case - Antique Audio Speaker Magnetization Restoration, Technology and Example Introduction

An article to read: the principle of motor magnetization, the need and the underlying logic of permanent magnet motors

February 26, 2026

Automated Magnetic Charging Integrated Solution Magnetizing Equipment Magnetizing Automation Magnetic Measuring Instruments Magnetizing Service Magnetizing is the core step in the manufacture and maintenance of permanent magnet motors such as permanent magnet synchronous motors (PMS) and brushless DC motors (BDC). It relies on the principle of electromagnetic induction and magnetic field energy conversion, with the help of external strong magnetic field to make the internal magnetic domains of permanent magnets arranged in a directional manner, so as to form stable and long-lasting magnetism, which is the basic link to ensure the normal operation of the motor. First, the essence of magnetization: to give the motor...

Spring Ushers in a New Journey, Action Drives New Chapters｜JIUJU Automation Kicks Off 2026 with Success

February 25, 2026

Magnetizing Equipment | Magnetizing Automation | Magnetic Measuring Instruments | Magnetizing Services Spring Returns, Unveiling a New Chapter — Setting Sail on a New Journey On the eighth day of the first lunar month of 2026, an auspicious day to commence work in the new year, JIUJU Automation was filled with warmth and vitality. Having set aside the leisurely pace of the Spring Festival, all employees gathered at the facility with full enthusiasm and high spirits, collectively embarking on the journey of hard work for the new year. They are committed to upholding their original aspirations through practical action and striving to write a new chapter of glory with dedicated effort. At 8:00 AM sharp...